How to install a new kitchen tap: 7 pro steps that work
Introduction
Installing a new kitchen tap is one of the most rewarding and cost-effective home upgrades you can do yourself. A new tap not only enhances the look of your kitchen but also improves functionality, water efficiency, and ease of use. Whether you’re replacing an outdated model or upgrading to a modern pull-down sprayer tap, the process is simpler than many homeowners think. With a few basic tools and careful preparation, you can complete the installation in less than an hour.
Before starting, it’s essential to understand the layout of your sink, the type of tap you’re installing, and the connection points for hot and cold water supply lines. This guide walks you through every step of the process, from safely removing the old fixture to testing the new one for leaks. By following these professional tap installation steps, you’ll not only ensure a watertight fit but also enjoy a smooth, trouble-free setup that enhances both the beauty and functionality of your kitchen space.
Tools and Materials Needed

Having the right tools and materials ready before starting your installation makes the process much smoother. You’ll need an adjustable spanner, basin wrench, plumber’s tape (Teflon tape), bucket or towel, torch, and cleaning cloths. Depending on your tap type, a Phillips or flat-head screwdriver may also be required. For stubborn connections, having penetrating oil on hand can help loosen corroded nuts.
In addition to tools, ensure you have the correct replacement tap, mounting hardware, and supply lines (if not included). Some modern taps come with integrated hoses and quick-connect fittings, simplifying installation. Always check that your new tap matches the number of holes in your sink—common configurations include one-hole, two-hole, or three-hole setups. Having everything organised before you begin ensures efficiency and prevents unnecessary interruptions during your kitchen tap installation process.
Step 1: Prepare for Installation

Before installing your new kitchen tap, proper preparation is key to a clean and efficient installation. Begin by turning off the water supply and clearing out the space beneath the sink. This ensures easy access to the plumbing connections and minimises the risk of water spills. Gather all tools within reach and inspect your new tap to confirm that all parts are included and undamaged.
Taking time to prepare your workspace will make the entire installation smoother. Lay down a towel or bucket under the sink to catch any residual water that may drip when disconnecting old lines. Good lighting is also important, as working under the sink can be cramped and dim. With your area ready and tools in place, you’ll be set to start the kitchen tap replacement confidently and safely.
Turn Off Water Supply
The first and most critical step in replacing your kitchen tap is shutting off the water supply. Locate the shut-off valves under your sink—usually small knobs connected to the hot and cold water pipes. Turn them clockwise until they stop to completely close the flow of water. If your valves are stuck or corroded, apply gentle pressure and use a spanner if necessary, but avoid forcing them too hard to prevent damage.
Once the valves are closed, open the tap to release any remaining water pressure in the lines. This helps prevent spills when you disconnect the hoses later. For older homes without individual shut-off valves, you may need to turn off the main water supply to your house. Properly shutting off the water ensures a safe, dry workspace and avoids unnecessary mess during the installation of your new kitchen tap.
Clear the Area
After turning off the water supply, it’s time to clear the area under the sink. Remove cleaning products, rubbish bins, or any stored items to give yourself enough room to work comfortably. Place a towel or bucket under the pipes to catch any residual water once you start loosening connections. Having a clean workspace helps you move tools around easily and prevents accidental damage to surrounding materials.
If your sink area is dark, use a torch or portable work light to improve visibility. It’s also a good idea to keep your tools organised on a nearby surface for quick access. Clearing the area not only improves efficiency but also reduces the chance of losing small parts during the installation process. A clutter-free environment makes replacing your kitchen tap faster and less stressful.
Step 2: Remove the Old Tap

Now that your workspace is ready, begin the process of removing the old kitchen tap. Start by disconnecting the water supply lines and then unmount the tap from underneath the sink. Depending on your tap type, it may be secured with nuts or mounting brackets. Over time, these connections can corrode, making them harder to remove—using penetrating oil can help loosen them.
Carefully follow this process to avoid damaging your sink or existing plumbing. Take your time when working around older fittings, as overtightening or forcing them can lead to cracks or leaks. Removing the old tap properly ensures the new one fits securely and allows you to inspect the condition of the sink deck and mounting holes before installation.
Disconnect water pipes
With the water supply turned off, it’s time to disconnect the water pipes from the tap. Use an adjustable spanner to loosen the nuts connecting the hot and cold water supply hoses to the shut-off valves. Be prepared for a small amount of water to drain out—use your bucket or towel to catch it. If your lines are flexible, handle them carefully to avoid twisting or kinking.
If your tap has older rigid copper supply lines, consider replacing them with flexible braided hoses for easier installation. Once disconnected, label or remember which line connects to hot and cold water to ensure proper reconnection later. Double-check that all water flow has stopped before proceeding. This step ensures that when you install your new kitchen tap, you’ll have a clean, dry area to work in and won’t risk any unexpected leaks. The same isolation valves and flexible connectors come up when a toilet is replaced; see our toilet fitting and replacement service.
Take Out the Old Tap
After disconnecting the water pipes, remove the old tap from the sink. Locate the mounting nuts or retaining brackets underneath the sink and use a basin wrench to loosen them. These nuts can be in tight spaces, so patience and proper positioning are key. Once loosened, remove them completely and gently lift the old tap out from above the sink.
If the tap is stuck due to mineral buildup or sealant residue, wiggle it back and forth to break the seal. Clean the sink area thoroughly, removing any old plumber’s putty or grime. This creates a smooth surface for the new tap’s base to sit on. Properly removing the old tap ensures that your new kitchen tap installation goes smoothly and creates a watertight fit without leaks.
Step 3: Install the New Tap

With the old tap removed and the area cleaned, it’s time to install your new kitchen tap. Begin by unpacking all the components and reading the manufacturer’s instructions carefully—each model has unique installation requirements. Make sure all washers, gaskets, and mounting hardware are included before proceeding.
Position the new tap through the designated holes in your sink or worktop. If your new tap comes with a deck plate (escutcheon), align it properly to cover any unused holes. Once positioned, check from below to ensure the tap shanks extend properly through the sink. Following these setup steps carefully guarantees proper alignment and a clean, professional appearance for your kitchen tap installation.
Read Manufacturer Instructions
Before proceeding with installation, always take the time to read the manufacturer’s instructions that come with your new tap. Even though most taps follow a similar installation process, different brands and models may include specific hardware, sealing requirements, or connection styles. Skipping this step could lead to improper installation or void your warranty.
The manual often provides helpful diagrams that clarify which washers or brackets go where. It might also include torque guidelines for tightening the mounting nuts and specific recommendations for applying plumber’s tape or sealant. Familiarising yourself with these details ensures your kitchen tap installation is done exactly as intended, maximising performance and longevity.
Position the Tap
Once you understand the instructions, it’s time to position the new kitchen tap correctly. Insert the tap base and hoses through the mounting holes on the sink or worktop. Make sure the tap sits evenly and straight from both the front and sides. If your model includes a gasket or rubber seal, position it between the tap base and sink surface to prevent leaks.
Ask someone to hold the tap in place while you work underneath to secure it later. A properly aligned tap ensures smooth operation and an aesthetically pleasing finish. Taking time to align it correctly before tightening saves you from the hassle of re-adjusting later. Once positioned, you’re ready to move on to securing the tap from below.
Step 4: Secure the Tap

Now that your tap is positioned, it’s time to secure it firmly in place. From beneath the sink, slide the mounting hardware—washers, nuts, or brackets—onto the tap shanks. Use your basin wrench to tighten the mounting nuts evenly on both sides. Tightening should be firm but not excessive, as over-tightening can damage the sink or distort the tap base.
After securing the tap, double-check its alignment from above the sink. It should sit flush and straight without any wobbling. Ensuring the tap is properly secured now prevents movement during use and maintains a watertight seal. A stable tap not only looks professional but also ensures long-term durability for your kitchen plumbing setup.
Tighten Mounting Nuts
Using an adjustable spanner or basin wrench, carefully tighten the mounting nuts beneath the sink. It’s important to apply even pressure to both sides to prevent the tap from tilting or shifting. If your tap has a bracket-style mounting system, follow the manufacturer’s torque recommendations for proper tension.
Avoid overtightening, which can cause stress cracks or warp the sink surface. Once tightened, gently wiggle the tap from above to confirm stability. This step ensures that your new kitchen tap is securely mounted and ready for the next phase—connecting the water supply lines.
Check Stability
After tightening, check the stability of your kitchen tap. The fixture should not rock or move when you apply pressure to the spout or handles. If it does, recheck the mounting nuts underneath and ensure they are tightened evenly. You may also need to realign the gasket or base plate if it’s unevenly seated.
Once stable, make sure the tap handle operates smoothly and that the base remains flush with the sink. A secure and balanced tap prevents leaks around the base and ensures a longer lifespan for your installation. Taking this extra step guarantees a polished, professional result that performs well for years.
Step 5: Connect Water Supply Lines
With your tap now secured, it’s time to connect the water supply lines. Attach the hot and cold water hoses from the tap to the corresponding shut-off valves under the sink. Make sure to match the lines correctly—hot water typically connects to the left valve and cold to the right.
Use Teflon tape on threaded connections to ensure a tight, leak-free seal. Hand-tighten the nuts first, then use an adjustable spanner for an additional quarter turn. Avoid over-tightening, which could strip threads or damage fittings. Properly connected supply lines ensure smooth water flow and prevent leaks once the tap is tested.
Attach Supply Lines
When attaching supply lines, double-check that the hose ends are free of debris and corrosion. Insert the hose fittings onto the shut-off valves and secure them snugly using your spanner. If you’re using flexible braided hoses, ensure they have a gentle curve and are not kinked or twisted, as this can restrict water flow.
It’s also recommended to replace old or worn-out hoses during this step to prevent future leaks. Once connected, check that all fittings are aligned properly and tightened evenly. Well-installed water supply lines are critical for ensuring consistent water pressure and reliable tap performance.
Ensure Tight Connections
After attaching the supply lines, inspect all connections for tightness. Run your fingers along the joints to confirm that the fittings are secure but not overtightened. For threaded connections, ensure the Teflon tape is properly applied and not exposed beyond the nut.
If your tap uses quick-connect fittings, listen for a “click” sound that indicates a secure attachment. A tight, properly sealed connection will prevent water from seeping out once the tap is operational. Double-checking every connection now ensures your kitchen tap installation remains leak-free and efficient.
Step 6: Test the Tap
Before finalising your project, it’s essential to test your new kitchen tap to ensure everything works correctly. Turn on the shut-off valves slowly and observe the connections under the sink for any leaks. Let the water run for a minute, alternating between hot and cold, to flush out any debris or air from the lines.
Pay close attention to the tap base and supply line joints for drips or moisture. If leaks are detected, tighten the connections slightly until they stop. This testing phase verifies that your tap installation is watertight, functional, and ready for everyday use.
Check for Leaks
As you test, thoroughly check for leaks around all fittings, including the base of the tap, supply line connections, and shut-off valves. Use a paper towel to detect even the smallest traces of water that might not be visible to the eye. Minor drips can lead to significant water damage if left unaddressed.
If leaks occur, turn off the water supply and reapply Teflon tape or plumber’s compound to the affected fittings. Retighten carefully and retest. Taking time to address leaks now ensures long-term performance and prevents costly repairs to your kitchen plumbing system.
Test Water Flow
Once you’ve confirmed there are no leaks, check the water flow to ensure it runs smoothly. Turn on the tap handle and observe the pressure and temperature from both hot and cold lines. If the flow seems uneven, remove and clean the aerator to clear debris trapped during installation.
Proper water flow confirms that your connections are secure and your tap is functioning correctly. Testing at this stage guarantees that your new kitchen tap operates at peak performance and delivers consistent water pressure for daily kitchen use.
Step 7: Clean Up and Finalise
After successful testing, it’s time to clean up and finalise your installation. Wipe away any excess water, debris, or plumber’s tape residue from around the sink and tap area. Reinstall any items you removed from under the sink, and ensure the area is tidy and organised.
Inspect the tap one last time for proper alignment and operation. Make sure the handle moves smoothly and that the spout swivels without resistance. Final cleanup gives your kitchen a polished look and confirms that your tap installation is both functional and aesthetically pleasing.
Seal the Edges
To complete your installation, seal the edges around the tap base with a thin bead of plumber’s putty or silicone sealant. This creates a watertight barrier that prevents water from seeping under the fixture and damaging your worktop. Smooth the sealant with your finger or a finishing tool for a clean finish.
Allow the sealant to cure according to manufacturer instructions before exposing it to water. Proper sealing not only enhances the appearance but also protects your sink area from long-term water damage. This final step ensures that your kitchen tap installation remains durable and leak-free for years.
Clear the Workspace
Once everything is sealed and tested, clear your workspace. Remove tools, rags, and buckets from under the sink, and store them properly. Wipe down surrounding surfaces and check that all valves are easily accessible for future maintenance.
This final step reinforces good installation habits and keeps your kitchen tidy. A clean, organised workspace reflects a professional-quality job and ensures your new kitchen tap remains easy to service if needed in the future.
Conclusion
Installing a new kitchen tap doesn’t have to be complicated. With the right tools, preparation, and attention to detail, you can complete the process efficiently and confidently. By following these seven professional steps, you’ll ensure your tap is installed securely, functions perfectly, and enhances the beauty and utility of your kitchen for years to come.
What tools do I need before installing a new kitchen tap?
Most installations only require an adjustable spanner, a basin wrench, plumber’s tape, and a bucket to catch leftover water. Having everything ready before you start makes the job much quicker and helps prevent mid-task hassles.
How do I know if my new tap will fit the existing holes in my sink?
Check whether your sink has one, two, or three mounting holes, and match that with the tap’s specifications. Many modern taps come with optional plates (escutcheons) that let them fit a wider range of sinks.
Do I need to shut off the water supply to install a kitchen tap?
Yes—turning off both the hot and cold valves under the sink is essential before removing the old tap. This prevents leaks, water damage, and unexpected sprays while working.
Why is my new tap leaking right after installation?
A fresh installation can leak if the supply lines aren’t tightened enough, the O-rings aren’t seated properly, or plumber’s tape wasn’t applied where needed. A quick check and gentle retightening usually resolves the issue.
Can I install a new kitchen tap without removing the sink?
In most cases, yes—you can replace the tap from underneath the sink using a basin wrench. Removing the sink is only necessary when access is extremely limited or the old hardware is completely stuck.
Do I need plumber’s tape when connecting the new tap?
You’ll typically use plumber’s tape on threaded connections to help create a watertight seal. However, compression fittings and flexible supply lines often have built-in seals that don’t require additional tape.